itel i6110 flash file Free

itel i6110 flash file Free

Card found : A00E13E7 , v0136
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.02
SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR

SPRD mode : SC6531 : REV : C000 : NOR
Operation : Format FileSystem [ v1.02 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
ERROR : Protocol HandShake failed!
Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
SPRD mode : SC6530 : REV : 0000 : NOR
Operation : Format FileSystem [ v1.02 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
ERROR : FDL NOT started!
Error : Loader send failed!
Wrong model selected! Select correct one!
Reconnect Power/Cable!
SPRD mode : SC6531 : REV : E000 : NOR
Operation : Format FileSystem [ v1.02 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_176634D6CEC4_NVM.nv
Executing FormatFFS ...
Format FFS Done!
Done!
Elapsed: 00:00:31

Reconnect Power/Cable!
Operation : Read Flash [ v1.02 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
Read Ok!
Saved to : C:\InfinityBox\CM2SCR\Backup\FLASH_DUMP.bin
Done!
Elapsed: 00:01:07

Reconnect Power/Cable!

Download